Direct Fit (3.5L/F-150) OEM GRADE Catalytic Converter, mandrel bent tubular stainless steel construction provides superior CatSmart enabled emissions reduction, longevity, and, superior flow efficiency. This OEM grade product contains a higher precious metal loading than the standard grade version.
US EPA and Canadian certified and approved for the vehicles listed below.
vehicle | engine | year | description |
---|---|---|---|
FORD F-150 | 3.5L | 2015 | Driver Side; Turbocharged |
FORD F-150 | 3.5L | 2016 | Driver Side; Turbocharged |
FORD F-150 | 3.5L | 2017 | Driver Side; Turbocharged |
FORD F-150 | 3.5L | 2017 | Driver Side; Turbocharged |
FORD F-150 | 3.5L | 2017 | Driver Side; Turbocharged |
FORD F-150 | 3.5L | 2017 | Driver Side; Turbocharged |
FORD F-150 | 3.5L | 2017 | Driver Side; Turbocharged |
FORD F-150 | 3.5L | 2017 | Driver Side; Turbocharged |
FORD F-150 | 3.5L | 2017 | Driver Side; Turbocharged |
FORD F-150 | 3.5L | 2018 | Driver Side |
FORD F-150 | 3.5L | 2018 | Driver Side |
FORD F-150 | 3.5L | 2018 | Driver Side |
FORD F-150 | 3.5L | 2018 | Driver Side |
FORD F-150 | 3.5L | 2018 | Driver Side |
FORD F-150 | 3.5L | 2018 | Driver Side |
FORD F-150 | 3.5L | 2018 | Driver Side |
FORD F-150 | 3.5L | 2018 | Driver Side |
FORD F-150 | 3.5L | 2019 | Driver Side |
FORD F-150 | 3.5L | 2019 | Driver Side |
FORD F-150 | 3.5L | 2019 | Driver Side |
FORD F-150 | 3.5L | 2019 | Driver Side |
FORD F-150 | 3.5L | 2019 | Driver Side |
FORD F-150 | 3.5L | 2019 | Driver Side |
FORD F-150 | 3.5L | 2019 | Driver Side |
FORD F-150 | 3.5L | 2020 | Driver Side |
FORD F-150 | 3.5L | 2020 | Driver Side |
FORD F-150 | 3.5L | 2020 | Driver Side |
FORD F-150 | 3.5L | 2020 | Driver Side |
FORD F-150 | 3.5L | 2020 | Driver Side |
FORD F-150 | 3.5L | 2020 | Driver Side |
FORD F-150 | 3.5L | 2020 | Driver Side |
1 Review Hide Reviews Show Reviews
-
did not fit the 3.3L
When I purchased this Item it took over a month from the time they collected the money to get back to me and ship it out. So if your in a hurry I do not recommend. I asked if it would fit the 3.3L gas engine. They told me yes. It did not fit, the bends were slightly off, and the O2 sensor on one pipe was not in the right location. It was rubbing on the firewall and preventing the pipe from sealing at the manifold. I had to make a few modifications. But Over all it is good quality and well built.