Universal Fit OEM GRADE Catalytic Converter. The universal catalytic converter is intended for PROFESSIONAL INSTALLATION only as it requires the use of welding, cutting and tube bending to fit properly. This OEM grade product contains a higher precious metal loading than the standard grade version.
US EPA and Canadian certified and approved for the vehicles listed below.
vehicle | engine | year | description |
---|---|---|---|
CHEVROLET SILVERADO 2500 HD | 6L | 2008 | Passenger Side; Cutting and welding required during installation |
CHEVROLET SILVERADO 2500 HD | 6L | 2009 | Passenger Side; Cutting and welding required during installation |
CHEVROLET BLAZER | 4.3L | 2001 | Cutting and welding required during installation |
CHEVROLET BLAZER | 4.3L | 2002 | Cutting and welding required during installation |
CHEVROLET BLAZER | 4.3L | 2003 | Cutting and welding required during installation |
CHEVROLET BLAZER | 4.3L | 2000 | Cutting and welding required during installation |
CHEVROLET BLAZER | 4.3L | 2004 | Cutting and welding required during installation |
GMC JIMMY | 4.3L | 2000 | Cutting and welding required during installation |
GMC JIMMY | 4.3L | 2001 | Cutting and welding required during installation |
OLDSMOBILE BRAVADA | 4.3L | 2000 | Cutting and welding required during installation |
OLDSMOBILE BRAVADA | 4.3L | 2001 | Cutting and welding required during installation |
CHEVROLET SILVERADO 2500 HD | 6L | 2001 | Passenger Side; Cutting and welding required during installation |
CHEVROLET SILVERADO 2500 HD | 8.1L | 2001 | Passenger Side; Cutting and welding required during installation |
CHEVROLET SILVERADO 2500 HD | 6L | 2002 | Passenger Side; Cutting and welding required during installation |
CHEVROLET SILVERADO 2500 HD | 8.1L | 2002 | Passenger Side; Cutting and welding required during installation |
CHEVROLET SILVERADO 2500 HD | 6L | 2003 | Passenger Side; Cutting and welding required during installation |
CHEVROLET SILVERADO 2500 HD | 8.1L | 2003 | Passenger Side; Cutting and welding required during installation |
CHEVROLET SILVERADO 2500 HD | 6L | 2004 | Passenger Side; Cutting and welding required during installation |
CHEVROLET SILVERADO 2500 HD | 8.1L | 2004 | Passenger Side; Cutting and welding required during installation |
CHEVROLET SILVERADO 2500 HD | 6L | 2005 | Passenger Side; Cutting and welding required during installation |
CHEVROLET SILVERADO 2500 HD | 8.1L | 2005 | Passenger Side; Cutting and welding required during installation |
CHEVROLET SILVERADO 2500 HD | 6L | 2006 | Passenger Side; Cutting and welding required during installation |
CHEVROLET SILVERADO 2500 HD | 8.1L | 2006 | Passenger Side; Cutting and welding required during installation |
CHEVROLET SILVERADO 2500 HD | 6L | 2007 | Passenger Side; Cutting and welding required during installation |
CHEVROLET SILVERADO 3500 HD | 6L | 2007 | Passenger Side; Cutting and welding required during installation |
GMC SIERRA 2500 HD | 8.1L | 2002 | Passenger Side; Cutting and welding required during installation |
GMC SIERRA 2500 HD | 6L | 2003 | Passenger Side; Cutting and welding required during installation |
GMC SIERRA 2500 HD | 8.1L | 2003 | Passenger Side; Cutting and welding required during installation |
GMC SIERRA 2500 HD | 8.1L | 2001 | Passenger Side; Cutting and welding required during installation |
GMC SIERRA 2500 HD | 6L | 2005 | Passenger Side; Cutting and welding required during installation |
GMC SIERRA 2500 HD | 8.1L | 2005 | Passenger Side; Cutting and welding required during installation |
GMC SIERRA 2500 HD | 6L | 2006 | Passenger Side; Cutting and welding required during installation |
GMC SIERRA 2500 HD | 8.1L | 2006 | Passenger Side; Cutting and welding required during installation |
GMC SIERRA 2500 HD | 6L | 2007 | Passenger Side; Cutting and welding required during installation |
GMC SIERRA 2500 HD CLASSIC | 8.1L | 2007 | Passenger Side; Cutting and welding required during installation |
GMC SIERRA 3500 HD | 6L | 2007 | Passenger Side; Cutting and welding required during installation |
CHEVROLET SILVERADO 2500 HD | 6L | 2005 | Cutting and welding required during installation |
CHEVROLET ASTRO | 4.3L | 2000 | Rear; Cutting and welding required during installation |
CHEVROLET ASTRO | 4.3L | 2001 | Rear; Cutting and welding required during installation |
CHEVROLET ASTRO | 4.3L | 2002 | Rear; Cutting and welding required during installation |
CHEVROLET ASTRO | 4.3L | 2003 | Rear; Cutting and welding required during installation |
CHEVROLET EXPRESS 1500 | 4.3L | 2003 | Cutting and welding required during installation |
CHEVROLET EXPRESS 2500 | 6L | 2003 | Driver Side; Cutting and welding required during installation |
CHEVROLET EXPRESS 2500 | 6L | 2003 | Passenger Side; Wheel Base: 135in; Cutting and welding required during installation |
CHEVROLET EXPRESS 2500 | 6L | 2003 | Passenger Side; Wheel Base: 155in; Cutting and welding required during installation |
CHEVROLET EXPRESS 2500 | 4.3L | 2003 | Cutting and welding required during installation |
CHEVROLET EXPRESS 2500 | 4.8L | 2003 | Driver Side; Cutting and welding required during installation |
CHEVROLET EXPRESS 2500 | 4.8L | 2003 | Passenger Side; Wheel Base: 135in; Cutting and welding required during installation |
CHEVROLET EXPRESS 2500 | 4.8L | 2003 | Passenger Side; Wheel Base: 155in; Cutting and welding required during installation |
CHEVROLET EXPRESS 3500 | 6L | 2003 | Driver Side; Cutting and welding required during installation |
CHEVROLET EXPRESS 3500 | 6L | 2003 | Passenger Side; Wheel Base: 135in; Cutting and welding required during installation |
CHEVROLET EXPRESS 3500 | 6L | 2003 | Passenger Side; Wheel Base: 155in; Cutting and welding required during installation |
CHEVROLET BLAZER | 4.3L | 2001 | 4 Door; 4WD; Federal Emission Equipped |
CHEVROLET BLAZER | 4.3L | 2000 | 2 Door; 4WD; Cutting and welding required during installation |
CHEVROLET S10 | 4.3L | 2000 | 4WD; Cutting and welding required during installation |
CHEVROLET S10 | 4.3L | 2001 | Rear; 4WD; Cutting and welding required during installation |
CHEVROLET S10 | 4.3L | 2001 | 4WD; California Emissions Equipped Vehicles Registered Outside of California |
CHEVROLET S10 | 4.3L | 2002 | Rear; 4WD; Cutting and welding required during installation |
CHEVROLET S10 | 4.3L | 2002 | 4WD; California Emissions Equipped Vehicles Registered Outside of California |
CHEVROLET S10 | 4.3L | 2003 | Rear; 4WD; Cutting and welding required during installation |
CHEVROLET S10 | 4.3L | 2003 | 4WD; California Emissions Equipped Vehicles Registered Outside of California |
CHEVROLET SILVERADO 1500 | 6L | 2003 | Passenger Side; Cutting and welding required during installation |
CHEVROLET SILVERADO 1500 | 6L | 2003 | Driver Side; Cutting and welding required during installation |
CHEVROLET SILVERADO 1500 HD | 6L | 2001 | Driver Side; With Pre-Converter |
CHEVROLET SILVERADO 1500 HD | 6L | 2001 | Passenger Side; Pre-Converter |
CHEVROLET SILVERADO 1500 HD | 6L | 2002 | Driver Side; With Pre-Converter |
CHEVROLET SILVERADO 1500 HD | 6L | 2002 | Passenger Side; Pre-Converter |
CHEVROLET SILVERADO 1500 HD | 6L | 2003 | Driver Side; With Pre-Converter |
CHEVROLET SILVERADO 1500 HD | 6L | 2003 | Passenger Side; Pre-Converter |
CHEVROLET SILVERADO 2500 | 6L | 2001 | Driver Side; Cutting and welding required during installation |
CHEVROLET SILVERADO 2500 | 6L | 2001 | Passenger Side; Cutting and welding required during installation |
CHEVROLET SILVERADO 2500 | 6L | 2002 | Driver Side; Cutting and welding required during installation |
CHEVROLET SILVERADO 2500 | 6L | 2002 | Passenger Side; Cutting and welding required during installation |
CHEVROLET SILVERADO 2500 HD | 8.1L | 2001 | Passenger Side; Wheel Base: 153in; Cutting and welding required during installation |
CHEVROLET SILVERADO 2500 HD | 8.1L | 2001 | Driver Side; Wheel Base: 153in; Cutting and welding required during installation |
CHEVROLET SILVERADO 2500 HD | 8.1L | 2002 | Passenger Side; Wheel Base: 153in; Cutting and welding required during installation |
CHEVROLET SILVERADO 2500 HD | 8.1L | 2002 | Driver Side; Wheel Base: 153in; Cutting and welding required during installation |
CHEVROLET SUBURBAN 2500 | 6L | 2000 | Passenger Side; Pre-Converter |
CHEVROLET SUBURBAN 2500 | 6L | 2001 | Passenger Side; Pre-Converter |
CHEVROLET SUBURBAN 2500 | 6L | 2002 | Passenger Side; Pre-Converter |
CHEVROLET SUBURBAN 2500 | 6L | 2003 | Passenger Side; Pre-Converter |
CHEVROLET ASTRO | 4.3L | 2004 | Rear; Cutting and welding required during installation |
CHEVROLET EXPRESS 1500 | 4.3L | 2004 | Cutting and welding required during installation |
CHEVROLET EXPRESS 2500 | 6L | 2004 | Driver Side; Cutting and welding required during installation |
CHEVROLET EXPRESS 2500 | 6L | 2004 | Passenger Side; Wheel Base: 135in; Cutting and welding required during installation |
CHEVROLET EXPRESS 2500 | 6L | 2004 | Passenger Side; Wheel Base: 155in; Cutting and welding required during installation |
CHEVROLET EXPRESS 2500 | 4.3L | 2004 | Cutting and welding required during installation |
CHEVROLET EXPRESS 2500 | 4.8L | 2004 | Driver Side; Cutting and welding required during installation |
CHEVROLET EXPRESS 2500 | 4.8L | 2004 | Passenger Side; Wheel Base: 135in; Cutting and welding required during installation |
CHEVROLET EXPRESS 2500 | 4.8L | 2004 | Passenger Side; Wheel Base: 155in; Cutting and welding required during installation |
CHEVROLET EXPRESS 3500 | 6L | 2004 | Driver Side; Cutting and welding required during installation |
CHEVROLET EXPRESS 3500 | 6L | 2004 | Passenger Side; Wheel Base: 135in; Cutting and welding required during installation |
CHEVROLET EXPRESS 3500 | 6L | 2004 | Passenger Side; Wheel Base: 155in; Cutting and welding required during installation |
CHEVROLET S10 | 4.3L | 2004 | 4WD; California Emissions Equipped Vehicles Registered Outside of California |
CHEVROLET SILVERADO 1500 | 6L | 2004 | Passenger Side; Cutting and welding required during installation |
CHEVROLET SILVERADO 1500 | 6L | 2004 | Driver Side; Cutting and welding required during installation |
CHEVROLET SILVERADO 1500 | 6L | 2004 | Passenger Side; Cutting and welding required during installation |
CHEVROLET SILVERADO 1500 | 6L | 2004 | Driver Side; Cutting and welding required during installation |
CHEVROLET SUBURBAN 2500 | 6L | 2004 | Passenger Side; Pre-Converter |
CHEVROLET ASTRO | 4.3L | 2005 | Rear; Cutting and welding required during installation |
CHEVROLET EXPRESS 1500 | 4.3L | 2005 | Cutting and welding required during installation |
CHEVROLET EXPRESS 2500 | 6L | 2005 | Driver Side; Cutting and welding required during installation |
CHEVROLET EXPRESS 2500 | 6L | 2005 | Passenger Side; Wheel Base: 135in; Cutting and welding required during installation |
CHEVROLET EXPRESS 2500 | 6L | 2005 | Passenger Side; Wheel Base: 155in; Cutting and welding required during installation |
CHEVROLET EXPRESS 2500 | 4.3L | 2005 | Cutting and welding required during installation |
CHEVROLET EXPRESS 2500 | 4.8L | 2005 | Driver Side; Cutting and welding required during installation |
CHEVROLET EXPRESS 2500 | 4.8L | 2005 | Passenger Side; Wheel Base: 135in; Cutting and welding required during installation |
CHEVROLET EXPRESS 2500 | 4.8L | 2005 | Passenger Side; Wheel Base: 155in; Cutting and welding required during installation |
CHEVROLET EXPRESS 3500 | 6L | 2005 | Driver Side; Cutting and welding required during installation |
CHEVROLET EXPRESS 3500 | 6L | 2005 | Passenger Side; Wheel Base: 135in; Cutting and welding required during installation |
CHEVROLET EXPRESS 3500 | 6L | 2005 | Passenger Side; Wheel Base: 155in; Cutting and welding required during installation |
CHEVROLET EXPRESS 3500 | 4.8L | 2005 | Driver Side; Cutting and welding required during installation |
CHEVROLET EXPRESS 3500 | 4.8L | 2005 | Passenger Side; Wheel Base: 135in; Cutting and welding required during installation |
CHEVROLET EXPRESS 3500 | 4.8L | 2005 | Passenger Side; Wheel Base: 155in; Cutting and welding required during installation |
CHEVROLET SILVERADO 1500 | 6L | 2005 | Passenger Side; Cutting and welding required during installation |
CHEVROLET SILVERADO 1500 | 6L | 2005 | Driver Side; Cutting and welding required during installation |
CHEVROLET SILVERADO 1500 | 6L | 2005 | Passenger Side; Cutting and welding required during installation |
CHEVROLET SILVERADO 1500 | 6L | 2005 | Driver Side; Cutting and welding required during installation |
CHEVROLET SILVERADO 1500 HD | 6L | 2005 | Driver Side; With Pre-Converter |
CHEVROLET SILVERADO 1500 HD | 6L | 2005 | Passenger Side; Pre-Converter |
CHEVROLET SUBURBAN 2500 | 6L | 2005 | Passenger Side; Pre-Converter |
CHEVROLET SUBURBAN 2500 | 6L | 2006 | Passenger Side; Pre-Converter |
CHEVROLET EXPRESS 1500 | 4.3L | 2006 | Cutting and welding required during installation |
CHEVROLET EXPRESS 2500 | 6L | 2006 | Driver Side; Cutting and welding required during installation |
CHEVROLET EXPRESS 2500 | 6L | 2006 | Passenger Side; Wheel Base: 135in; Cutting and welding required during installation |
CHEVROLET EXPRESS 2500 | 6L | 2006 | Passenger Side; Wheel Base: 155in; Cutting and welding required during installation |
CHEVROLET EXPRESS 2500 | 4.8L | 2006 | Driver Side; Cutting and welding required during installation |
CHEVROLET EXPRESS 2500 | 4.8L | 2006 | Passenger Side; Wheel Base: 135in; Cutting and welding required during installation |
CHEVROLET EXPRESS 2500 | 4.8L | 2006 | Passenger Side; Wheel Base: 155in; Cutting and welding required during installation |
CHEVROLET EXPRESS 3500 | 6L | 2006 | Driver Side; Cutting and welding required during installation |
CHEVROLET EXPRESS 3500 | 6L | 2006 | Passenger Side; Wheel Base: 135in; Cutting and welding required during installation |
CHEVROLET EXPRESS 3500 | 6L | 2006 | Passenger Side; Wheel Base: 155in; Cutting and welding required during installation |
CHEVROLET EXPRESS 3500 | 4.8L | 2006 | Driver Side; Cutting and welding required during installation |
CHEVROLET EXPRESS 3500 | 4.8L | 2006 | Passenger Side; Wheel Base: 135in; Cutting and welding required during installation |
CHEVROLET EXPRESS 3500 | 4.8L | 2006 | Passenger Side; Wheel Base: 155in; Cutting and welding required during installation |
CHEVROLET SILVERADO 1500 | 6L | 2006 | Passenger Side; Cutting and welding required during installation |
CHEVROLET SILVERADO 1500 | 6L | 2006 | Driver Side; Cutting and welding required during installation |
CHEVROLET SILVERADO 1500 | 6L | 2006 | Passenger Side; Cutting and welding required during installation |
CHEVROLET SILVERADO 1500 | 6L | 2006 | Driver Side; Cutting and welding required during installation |
CHEVROLET SILVERADO 1500 HD | 6L | 2006 | Driver Side; With Pre-Converter |
CHEVROLET SILVERADO 1500 HD | 6L | 2006 | Passenger Side; Pre-Converter |
CHEVROLET SILVERADO 1500 CLASSIC | 6L | 2007 | Passenger Side; Cutting and welding required during installation |
CHEVROLET SILVERADO 1500<
|